Home Printer Setups & Firmware Connecting a Bambu Lab printer using Native LAN-Only Mode

Connecting a Bambu Lab printer using Native LAN-Only Mode

Last updated on Mar 31, 2026

Fully Local Bambu Integrations

Bambu Lab’s cloud isn’t meant for enterprise control. By switching to LAN-Only Mode, SoLoPrint routes the G-Code exclusively through your local network Bridge, bypassing externally synced Chinese servers entirely.

1. Preparing the Machine

  1. Walk to your physical Bambu printer (X1C, P1S, A1, etc.) and tap the Settings gear icon.
  2. Tap the Network tab.
  3. Switch LAN Only Mode to ON.
  4. Note the displayed IP Address and the Access Code (PIN) shown on the screen.

2. SoLoPrint Integration

  1. Go to Printers > Add Printer in the SoLoPrint Dashboard.
  2. Select Bambu Lab (Native LAN).
  3. Enter the IP Address and the Access Code you noted earlier.
  4. Ensure you select the Bridge located on the same logical subnetwork as the Bambu machine (otherwise the multicast protocol will fail).

3. Verification

You will instantly see native Bambu Lab features load into the SoLoPrint UI, including their proprietary camera streams routed through our WebRTC tunnel.